manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 56 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 56

E N T 2 0 1 0

Model Name:

RJ–4100

E N T 2 0 1 0

Model Name:

RJ–4100

Trouble with Initialization

When No Error is Displayed on the Printer's Liquid Crystal Display

1

2

• Initial filling of inks failed

(Initial filling means to fill the head
with ink to enable it to print.) 

❈

This symptom means that when
new cartridges are first installed, or
when a new cartridge is fitted as a
result of a "no ink" message, the
initial filling operation is not per-
formed.

• Initial filling begins but the ink does

not reach the head or it reaches the
head but is not ejected. 

Go to EXA2020

1-1

1-2

1-3

1-4

• Is "Cover open" or "Lever up" displayed?

→

Close the front cover.

→

Lower the pressure lever.

• Ink cartridges may contain dye inks or pigment inks. Each type of ink comes in four colors. Are they all genuine

Mutoh cartridges?  
Is there a mixture of dye and pigment type ink cartridges installed?

→

Replace them with genuine Mutoh ink cartridges and check again.

• Cartridges must be inserted in the right direction. Are they mounted correctly?

→

Check the direction and mount them again correctly. 

• Are the ink cartridges pushed right to the back?

→

Make sure they are inserted properly. 

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP2000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Initialization

56

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments