manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 81 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 81

E N T 4 1 1 0

Model Name:

RJ–4100

E N T 4 1 1 0

Model Name:

RJ–4100

Trouble with Printing

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Inaccurate line distance in the direc-

tion of media feed
(Subsidiary scanning distance)

1-1

1-2

1-3

• Are the environmental conditions within the recommended range for guaranteed working (Temperature: 16°C to

25°C, Humidity 50% to 60%, no condensation)? 

→

Bring environmental conditions with the guaranteed range. 

• Has the distance compensation operation been done?

→

Carry out distance compensation.

• Is the media that is mounted a type that is recommended by Mutoh?

→

Replace it with recommended media and try again.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP4000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Printing

81

Direction of media feed

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments