manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 94 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 94

E N T 6 0 5 0

Model Name:

RJ–4100

E N T 6 0 5 0

Model Name:

RJ–4100

Trouble with Media Cutting

When No Error is Displayed on the Printer's Liquid Crystal Display

1

2

• Cutting is delayed for some time after

printing has ended

• White paper is cut

1-1

1-2

2-1

Confirm:

Has an ink drying time been set?

Yes: Ink drying time is basically the period required for the ink to dry and if necessary the ink

must be given time to dry. If the time is only for cutting, try changing it.
However, the ink may be smudged if cutting occurs before the ink is completely dry.

No:

Go to 2-1

Reference: For details concerning how to control ink drying time, refer to the item on “Menu”

in “Printer settings and special functions” of the Operation Manual.  

Confirm:

Are there any extra lines or points on the output from the application?

Yes: Delete the extra lines or points from the application output
No:

Go to 2-1

Procedure: Investigate the current printer connection environment and report a printout of the setting details,

together with printing data that will enable the symptoms to be verified, to your local dealer using the
prescribed format.

•

For how to take a print of the setting details, refer to “Control panel” in the Operation
Manual.

•

Data for printing should be able to be analysed by the printer. If it can not be dumped to a
file by the application and the driver, a data dump list from a comparatively simple diagram
will be satisfactory. (However, the data should enable the symptoms to be verified.)

•

Please include in the printer connection environment: the host computer, the application,
type of driver, the interface being used, length of cable, whether or not there is a switching
unit.

•

If possible, obtain a sample printout.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP6000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Media Cutting

94

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments