manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 152 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 152

E X A 2 0 2 1

Model Name:

RJ–4100

E X A 2 0 2 1

Model Name:

RJ–4100

Trouble with Initialization

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Initial filling is completed but no ink

comes out

(Initial filling means to fill the head
with ink to enable it to print.)

1-10

1-11

1-12

1-13

1-14

1-15

1-16

1-17

• Are there any breaks, cuts or air leaks in the ink tubes?

→

Change each ink tube, cleaning each time and checking that ink flows during cleaning.

• Are connectors J207 (HEAD BK) and J208 (HEAD COL) on the head board assembly, and head

cables 1 and 2 on the print head, inserted obliquely? Are they locked securely? Check.
Check connector connections.

→

Insert the connectors again.

• Is there a broken lead in head cables 1 and 2?

→

Replace head cables 1 and 2.

• Is the print head assembly damaged?

→

Replace the print head assembly (black).

→

Replace the print head assembly (color).

• Is the head board assembly damaged?

→

Replace it.

• Check the Y cable connections

→

Is it inserted obliquely? Check.
J201 (MAIN1) and J202 (MAIN2) on the head board assembly.
J114 (HEAD1) and J115 (Head2) on the main board assembly.

→

Insert the connectors again.

• Is there a broken lead in Y cables 1 and 2?

→

Replace Y cables 1 and 2.

• The main board assembly may be damaged.

→

Replace it.

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Initialization

1370

1400

1390

1420

1360

1140

R E P

B A C

G O   T O   R e f .   P a g e s

152

CAUTION: Main board connectors J114 (HEAD1) and J115 (HEAD2) and head

board connectors J201 (MAIN1) and J202 (MAIN2) should be plugged
in securely.
The main board may be damaged if power is applied when they are
not properly connected. 

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments