manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 34 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 34

E N T 1 0 4 0

Model Name:

RJ–4100

E N T 1 0 4 0

Model Name:

RJ–4100

Printer Status Messages

When Message is Displayed

1

• Remove Media

This message is displayed, if after
raising the lever during printing and
cutting the media, the lever is lowered
without the media having been
removed.

1-1

• Does the error appear after raising the lever during printing and cutting the media and then removing the

media?  

→

Switch on the power again.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP1000

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

Printer Status Messages

34

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments