10-14 Patient Data Management
Continue an Exam
Select an exam that is paused within 24 hours, click [Continue Exam] to activate the exam and load
the basic patient information and measurement data to continue the exam.
If you want to select a patient data in an external memory database, you have to first allow the
sy
stem to load the patient data to the system’s patient database.
Recycle bin
The recycle bin is used to store deleted patient data, exam data and images.
The system supports recovery of these data from the recycle bin.
To recover the deleted patient data, click
at the lower right corner of the screen (when the
button is gray, the operation is unavailable) to enter the Patient Recycle Bin screen.
1. Select items to be recovered in the list.
2. Select operations:
Click [Restore Items] to restore the item back to iStation.
Click [Delete] to delete the item permanently, and the item can never be restored again;
Click [Restore All Items] to restore all the items back to iStation;
Click [Empty Recycle Bin] to empty the recycle bin and all items can never be restored again.
Click [Exit] to exit the Worklist.
NOTE: if the capacity of the recycle bin exceeds 200. The system reminds the user to clean. Follow
the procedures to clean the recycle bin.
10.5 iStorage
Network storage is used to save image files and measurement reports to the remote PC server.
Select [Setup]
[Network Preset]
[Network Storage] to perform network storage setting.(For details,
please refer to Setup chapter.)
1. Enter iStation, select one (or more than one) patient data or image in the local data source;
2. Click [Send To].
3. Select [iStorage] in the Send To dialogue box, and select the PC server of the right side.
4. Select PC transfer format and check whether to send report.
5. Click [OK] to start sending.
To use iStorage function, you need UltraAssist software in 2.0 version (with V1.0 network protocol);
consult Mindray service engineer for details.
10.6 Print
10.6.1 Print Setting
For printer connection and driver installation, please refer to Chapter3.6.3 Installing a Graph/Text
Printer
Print Service Setting
1. Select the [Setup]
[Print Preset], select an existed printer service in the list.
2. Select the printer type in the Property box.
3. Set printing properties.
4. Click [Save] to confirm the setting and exit the preset page.
User-defined shortcut key for printing
Select the image to be printed on the iStation or Review screen, and click [Send To] to select the
desired printer.
