11-16 DICOM/HL7
Set the storage option to
Atttach SWhen Store Imgaes
, or
Only Store SR
.
Send OB/GUN/Cardica/Vessel SR on iStation.
1. Choose the storage option to
Atttach SWhen Store Imgaes
, or
Only Store SR
.
2. Create new patient information or load the patient information.
3. Perform obstetric (gynecology, cardiac or vascular) measurements:
4. Save the image or the cine.
5. End an exam
6. Click [Send Exam] on iStation page. The following figure appears:
7. Select DICOM in the storage server list;
select a server in the “Storage Server” list.
8. Click [OK], the status of sending task can be viewed in DICOM task management. After
successful storage of both image and structured report; you can see the storage commitment
mark “√” in the list below
in the iStation screen.
Encapsulate PDF
Encapsulate PDF refers to the PDF file is encapsulated in DICOM IOD.
Encapsulated PDF is sent by following the procedures below:
Send in the unit of single exam;
The exam with the state of
End, Cancel or Stop
cannot be sent as encapsulated PDF.
Check
“Encapsulate PDF” in the storage service preset;
If there is an exam result in the report template, this type of exam should be performed.
Sending the exam or archiving the exam can send the encapsulated PDF file.
Unload DCM file
The image can be unloaded to DCM format and send to the storage media, iStorage.
1. Select the image, and click
to enter the page.
2. Select
“Target”-“iStorage” to export the image in DCM format. See the figure below:
