DICOM/HL7 11-17
3. Click [OK] to send DCM format file to the external media.
11.3.2 DICOM Print
DICOM Print is used to send images to the DICOM print server for printing.
Perform the following proceures after configuring DICOM print.
Print images on iStation/Review/main screens
1. Select the image, the cine and the exam and send them. Operations are the same as for DICOM
storage.
2. In the
Send To
dialog box, select a DICOM print server. (For the dialog box, see DICOM Storage).
3. Click [OK] to send the image and begin printing.
To send images using a shortcut key
You can send single-frame images to a DICOM print server while saving to hard drive using a
shortcut key.
1. Define the short key. For details, see Chapter 10.2.8 Auxiliary Output Function for details.
2. Set a default printer server.
3. Press the shortcut key to send the image to the hard disk; the system also sends the single-frame
file to the printer server.
To print images for storage after an exam ends
(1)
Open “[Setup]
[System]
[General]” and then check
in the Patient Info area.
(2) Set a default print server.
(3) Start the scan and obtain the image. Press <End Exam> each time; the system will send the image
to the default DICOM print server for printing.
11.3.3 DICOM Worklist/HL7 Query
For details, see Chapter 4.1.2.2 WorkList/HL7 Enquiry.
