DICOM/HL7 11-5
Name
Description
Doppler audio
Set to save the audio of PW mode.
Storage mode
Set the storage mode for image and cine file.
Parallel file: save the current file, and is ready for the storage of
the next file.
Parallel frame: send the current frame, and is ready for sending
the next frame.
TransducerTracking
Files of images that are saved in DCM format through DICOM or
DICOMDIR contain transducer serial number information.
Add
Add the DICOM service to the service list.
Cancel
Click to cancel parameter setting.
Update
Select an item in the service list, change the parameters in the
above area, and click [Update] to update the item in the service
list.
Service List
Delete
Click to delete the selected service in the service list.
Default
Set the default server for the storage service.
Select an item in the service list, click [Default] and you can see
“Y” in the Default column.
Verify
Click to verify if the two DICOM application entities are normally
connected.
Tip:
If the server software supports the compression algorithm, select JPEG, RLE, JPEG2000.
Otherwise, original data should be used (RLE is the default method).
RLE, JPEG and JPEG2000 are not supported by all SCPs. Refer to the SCP's DICOM
CONFORMANCE STATEMENT electronic file to check whether SCP supports it or not. Do not
select these compression modes if the storage server does not support them.
Images of PW/M/TVM/TVD mode (B image is not frozen) and images other than
PW/M/TVM/TVD mode: if “Max Frame rate” is not “Full” and the actual frame rate is larger than
the set value, the system will save the image files in a frame rate of the set value, and transfer in
a frame rate of B mode.
Images of PW/M/TVM/TVD mode (B image is frozen), the system will
save/transfer the images files in frame rate of 6.
11.1.3.2 Print Service Preset
1. On the DICOM Service screen, click [Print] page tab to enter the Print page.
2. Select a device and enter the correct AE Title, port, etc.
3. Click [Add] to add the service to the Service List.
