5-54 Image Optimization
Surface Enhancement
Description: This function is to make the edge structure of the image and surface details clearer, so as to
enhance the overall contrast.
Operation: Touch [Surf. ENH] to adjust the enhancement level.
Effect: The higher the level is, the clearer the edge structure of the image is.
When the level is higher than 0 and [Move Light] is highlighted, image close to the light source is
clearer, and image away from the light source is darker.
Move the light
This function is to adjust the position of the light source as VR is considered.The image becomes
clearer as keeping closer to the light.
Adjustment: roll the trackball and change the light position to make fine adjustments after tapping
[Move Light].
Image Zooming
Function:
Adjust the zoom factor of 3D image, the section images will be zoomed in/out accordingly.
Operation:
Switch the current window to 3D window.
Rotate <Zoom> to change the magnification factor.
Zoom in or out by piching or stretching in mapping mode.
Range:
0.2
– 4 times.
Sync
This function is to switch the direction of the image to the direction that is perpendicular to the current
active plane, so as to get a better observation.
