Probes and Biopsy 13-33
NGB-027
1. Put on the sterile transducer sheath.
2. Open the clamp. Insert the front clamp to the front groove.
3. Push the bispy forward (arrow
’s direction) until the locating pole inserting into the location hole. Turn
the lower clamp againsy the intra-cavity probe. Tighten the nut to lock the biopsy (arrow
’s direction).
NGB-031
1. Put on the sterile probe sheath.
2. Select a proper needle-guided bracket, and match the locating groove with the tab of the probe.
Mount the bracket onto the probe.
3. Tighten the pinch nut of the needle-guided bracket (following the arrow
’s direction) to confirm that
the needle-guided bracket is properly installed on the probe.
