17-4 System Maintenance
Method:
Use a soft dry cloth to clean the system's cover. If the system is dirty, moisten the soft cloth with mild
soapy water, wipe away any stains, then air dry.
Clean dust-proof cover
Tool: Soft brush
Method:
a) Disassemble dust-proof cover before cleaning.
Hold electronics assembly on the base and push the clip by the index figure, pull out the
dust-proof cover.
NOTE:
If you can not pull out the dust-proof cover after the above operations being taken,
please pull the other clip and pull out the dust-proof cover at the same time.
b) Cleaning: with soft brush and then wipe off the dust.
c) Assemble dust-proof covers.
Input the dust-proof clasp into the slot of the main unit, push the dust-proof inward until the
dust-proof clasp is stuck in the slot.
Clip position 2
Clip position
1
Push direction
Clip position
