iWorks (Auto Workflow Protocol) B-3
Name
Note
1
Displays the protocol name.
2
Displays the different types of views based on different attributes.
3
Current view type.
4
Views contained of the current type.
5
Already finishe
d view, with a green “√” on the left.
6
The current active view, with green solid frame around the image.
B.5
View Operation
In iWorks status, you can perform view selection, repeat, replacement and delete operations using the
touch screen.
For some views, the system switches to the relevant imaging modes if necessary.
The comment for the current view has been automatically added to the bottom-left corner of the image,
ready for you to scan the specified anatomy.
B.5.1 View Selection
Tap [Previous]/[Next] to select the view to be scanned. The current view is surrounded by a solid green
frame.
B.5.2 View Operation
In the current active view, you can perform image scanning, measurements, and adding comments and
body marks, etc. Operations are the same as those for manual operation. See the relevant chapters for
details.
B.5.3 Repeat View
If necessary, tap [Repeat] to insert another template of the current view. You can then perform an extra
examination.
B.5.4 View Replacement
The previous image will be deleted and replaced by the new image.
B.5.5 Delete View
Tap [Previous]/[Next] to select the view to be deleted. Tap [Delete] to delete the selected view.
B.6
Check Incomplete Section
You can quickly check and select an incomplete view using [Incomplete Section] on the touch screen.
Tap [Incomplete] on the screen to enter the selecting dialog box on the touch screen and touch the
desired view to enter the status.
