System Preparation 3-7
Tilt the monitor
When positioned vertically, the monitor can be tilted 20° backward and can be tilted forward to a
horizontal position. When transporting or moving the system, keep the monitor in the horizontal
position, as shown below:
Lock the monitor
To move the machine a short distance, install the protective foam (provided in the packaging) onto
the monitor, adjust the monitor and supporting arm to the middle position, and then lock the locking
lever to
state to avoid movement.
3.3.2
Monitor Brightness/Contrast Adjustment
Monitoring the brightness and contrast adjustment is one of the most important factors for proper image
qualities. If set incorrectly, the gain, TGC, dynamic range or even acoustic output have to be changed
more often than necessary to compensate.
The adjusting buttons are shown as follows:
Brightness adjustment:
Press <F10 Setup>. Click [System]
[General]
[LCD] to adjust the brightness.
Contrast adjustment:
Press <F10 Setup>. Click [System]
[General]
[LCD] to adjust the contrast.
Click “Brightness auto
adjustment”. The brightness/contrast can be adjusted according to the situation
NOTE:
On the monitor, the brightness adjustment comes before contrast. After readjusting the
monitor’s contrast and brightness, adjust all preset and peripheral settings.
