13-54 Probes and Biopsy
NOTE: refer to manufacturer manual for details about installation and disinfection of the magnetic
navigator. Contact the magnetic navigator if necessary.
To order needle sensor and needle sensor bracket, contact:
CIVCO Medical Instruments Co.
102 First Street South, Kalona, IA 52247-9589 USA
Tel: 1-319-656-4447
E-mail: [email protected]
1.
Refer to “5.17.2 Magnetic Navigator” for installation of magnetic controller, auxiliary power line, USB
cable, magnetic generator and probe sensor.Abdomen sensor is necessary under Fusion imaging
mode.
2.
Connect the needle sensor to the 3rd port on the magnetic controller.
3.
Put on the sterile sheath onto the needle sensor.
4.
Insert the sensor into the needle.
eTRAX neeedle
eTRAX needle sensor
Sterile sheath
Biopsy needle sensor port
