DICOM/HL7 11-9
11.1.3.4 MPPS Preset
1. Select [Setup]
[DICOM/HL7]
[DICOM Service Setting]
[MPPS] to enter the MPPS page.
2. Select the device name, and type the information about the AE title, the port.
3. Click [Add]. The entry will be added in the service list.
NOTE
:
Set the MPPS service as the default when using the MPPS.
MPPS setting items are described as follows:
Name
Note
Configure
new service
Device Name
After you set the server (s) in DICOM Server Setting, the name (s)
will appear in the drop-down list, select the name of the MPPS
server.
Service Name
Default is server-MPPS, and it can be modified.
AE Title
Application Entity title.here, it should be consistent with that of the
MPPS server.
Port
DICOM communication port, 104 by default.Here, the port should
be consistent with that of the MPPS server.
Maximum Retries
It starts retrying if it fails to send DICOM task to the server. The
retry entry times should be this value.
Interval Time(s)
Reserved feature.
Timeout
Value: 5
－
60s, in increments of 5, and 15 by default.The
connection is disabled if there is no message to be sent in 15
seconds after the MPPS being sent.
Add
Add the DICOM service to the service list.
Cancel
Click to cancel the parameter setting.
Update
Select an item in the service list, change the parameters in the
above area, and click [Update] to update the item in the service
list.
Service list
Delete
Click to delete the selected service in the service list
Default
Set the worklist server as the default.
Select an item in the service list, click [Default] and you can see
“Y” in the Default column.
