Image Optimization 5-99
Operations
Tap [Persistence] on the touch screen to adjust the parameter.
The bigger the value is, the higher the frame optimization effect achieves.
Effects
The persistence function can remove image noise and optimize image effect to gain a
more detailed image.
High FR
Description
This feature is used to improve the frame rate (FR).
Operations
Tap [Hign FR] on the touch screen to enable the function and the button will be
highlighted.
Invert
Description
Invert the map to satisfy the different doctors to define the benign lesion or malignant
lesion.
Operation
Tap [Invert] to enable the function (the soft key is highlighted).
iLayering
Description
To increase the layer display in elasto images.
Operation
Tap [iLayering] to enable the function.
Filtering
Description
To filter the noise of the elasto image.
Operation
Rotate the knob under [Filter] on the touchpad.
The higher the level is, the smaller the noise of the elasto image becomes, and the
clearer the edge of the field target appears.
Impacts
The system restarts scanning B image and E image after the filtering is completed.
Map Position
Description
This feature is used to adjust the up/down position of the map.
Operations
Tap [Map Position] on the touch screen to adjust the parameter.
5.14.2.3 Measuring
Press <Caliper> to enter general measurements. You can perform the measurements of Elastograph,
Elas. Ratio, Directional Ratio, Elas. Hist and etc.
Press <Measure> to enter application measurement. You can perform measurements on Isthmus and
Mass, etc.
Refer to Operator’s Manual (Advanced Volume) for details.
5.14.2.4 Cine Review
Press <Freeze> to freeze the image and enter cine review state.
