Mindray Resona 7, Operator'S Manual

Page: 285 / 451

DICOM/HL7 11-7
Name Description
Medium Type
Specify print medium: Paper, Clear Film, Blue Film; select Blue Film
or Clear Film for black and white printing; select Paper for color
printing.
Trim
Specify whether you want a trim box to be printed around each
image on the film: Yes or No.
Configuration Info Enter configuration information in the field.
Min Density Enter the minimum density of the film.
Max Density Enter the maximum density of the film.
Destination
Specify where the file is exposed: MAGAZINE (stored in the
magazine), or, PROCESSOR (exposed in the processor).
Magnification Type
Select how the printer magnifies an image to fit the film.
Replicate: interpolated pixels belong to duplicate of adjacent
pixels);
Bilinear: interpolated pixels are generated from bilinear
interpolations between adjacent pixels;
Cubic: interpolated pixels are generated from cubic interpolations
between adjacent pixels;
None: without interpolation.
Add Add the DICOM service to the service list
Cancel Click to cancel parameter preset.
Update
Select an item in the service list, change the parameters in the
above area, and click [Update] to update the item in the service list.
Service List
Delete Click to delete the selected service in the service list.
Default
Set the default server for the printer service
Select an item in the service list, c
lick [Default] and you can see “Y”
in the Default column.
Verify
Click to verify if the two DICOM application entities are normally
connected.
11.1.3.3 Worklist Setting
1. Select [Setup]

[DICOM/HL7]

[SetDICOM Service]
 [Worklist] to enter the “Worklist” page.
2. Select device in the drop-down list, the available devices are DICOM services already set in the
system, enter the information about AE, Title and the port.

Click [Add] to add the service to the Service list;

Select an item in the service list, change the parameters in the above area, and click [Update] to
update the item in the service list; click [Cancel] to cancel changing.

Select an item in the service list, and click [Delete] to delete the service.

Select an item in the service list, and click [Default] to set the server to be the default service.
3. Select an item in the service list, and click [Verify] to verify the connection.