Probes and Biopsy 13-43
3. Rotate the clamping nuts of the needle guided-bracket on right and left side (following the direction
of the arrow). The needle guided-bracket is separate from the transducer. Hold the transducer and
take out the bracket.
NGB-025
Hold the prober in the left hand;
unscrew the locking nut with the right hand to loose the clamp (arrow’s
direction).
Lift the biopsy up (towards arrow’s direction). The locating pole, front clamp, the locating hole
and the front clamp become loose.
NGB-026
1. Screw the pinch nut to release the needle-guided bracket.
NGB-027
Hold the prober in the left hand; unscrew the locking nut with the right hand to loose the clamp
(arrow’s direction).Lift the biopsy up (towards arrow’s direction). The locating pole, front clamp, the
locating hole and the front clamp become loose.
NGB-031
Separation of the needle in the operation
1. Open the block pin until the v-shaped cover can be rotated.
