Physiological Unit Signal 7-5
The check after the exam of general patient:
Wipe the sensor with soft cloth dipping with medicinal alcohol, and then air dry the senor or clean
the sensor with dry cloth.
The check after the exam of patient with cutaneous infection:
Use the cover for the sensor. The cover should be against the appearance of the acoustic window.
Use the appropriate cover.To order the cover, contact:
CIVCO Medical Instruments Co.
102 First Street South, Kalona, IA 52247-9589 USA
Tel: 1-319-656-4447
E-mail: [email protected]
7.3
ECG/PCG Review
When an image is frozen, the physiological waveform where the image is triggered will be frozen at the
same time. All real time images are in the status of linked review. The marker of the ECG or PCG is set
up as the time reference.
7.4
Respiratory Wave
7.4.1
Respiratory Wave Operation Basic Procedures
1. Connect the ECG lead and position the ECG electrodes. For details of ECG lead connection, see
“7.1.1 ECG Operation Basic Procedures”.
2. Press <F12 Physio> on the control panel to enter Physio screen.
3. Switch the imaging modes and display formats, adjusting the parameters to get an optimized image.
4. Parameter adjusting
In Physio menu, click [RESP] on the touch screen. Adjust [Speed], [RESP Gain], [Position] and
[Invert].
5. Exit Respiratory display mode, and remove ECG electrodes from the patient.
6. Press <F12 Physio> to exit physio mode.
