5-110 Image Optimization
QT-Time Table Operation:
To add an entry:
Enter a heart rate and the referring systolic duration and then click [Update].
To delete an entry:
Select the required heart rate and systolic duration pair from the QT
– Time Table and then click
[Delete].
5.15.5.2 Protocol Edit
You can create, edit, delete, copy, export and load the Stress Echo protocols using the Protocol Editor
dialog box.
Access the Protocol Editor dialog box by clicking [Protocol] in [Setup]
[Stress Echo]
[Protocol], or
clicking [Edit] on the Select Protocol screen as shown in the figure below:
Item
Function Description
Acquire mode
Set the type of ROI: manual ROI or full-screen.
Overlay
Select the items to be labeled on each loop.
WMS score type
Set the chamber segment division method.
QT-Time table
To customize the length of systolic duration acquired for a specific heart rate
，
it will store the clip duration. You can add and remove entries in this table. You
can also load the factory defaults.
Heart rate
Enter the heart rate.
Syst. duration
Enter the systolic duration.
Load factory
To reset the QT time table.
