16-2
EMC Guidance and Manufacturer’s Declaration
Imaging;
Doppler acoustic spectral displaying;
Taking measurements;
Patient information;
Date/time information.
TABLE 1
GUIDANCE AND MINDRAY DECLARATION
—ELECTROMAGNETIC EMISSIONS
The system is intended for use in the electromagnetic environment specified below. The customer or
the user of system should assure that it is used in such an environment.
EMISSIONS TEST
COMPLIANCE
ELECTROMAGNETIC ENVIROMENT
－
GUIDANCE
RF emissions
CISPR 11
Group 1
The system
uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B
The system
is suitable for use in all establishments
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes
Harmonic Emissions
IEC 61000-3-2
Class A
Voltage Fluctuations/
Flicker Emissions
IEC 61000-3-3
Compliance
Note
：
The following Table available to take the place of Table 1 above when the system include Mag. Navigator for
achieve Class A system
：
GUIDANCE AND MINDRAY DECLARATION
—ELECTROMAGNETIC EMISSIONS
The system is intended for use in the electromagnetic environment specified below. The customer or
the user of system should assure that it is used in such an environment.
EMISSIONS TEST
COMPLIANCE
ELECTROMAGNETIC ENVIROMENT
－
GUIDANCE
RF emissions
CISPR 11
Group 1
The system
uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class A
The system
is suitable for use in all establishments other
than domestic and those directly connected to the public
low-voltage power supply network that supplies buildings
used for domestic purposes.
Harmonic Emissions
IEC 61000-3-2
Not applicable
Voltage Fluctuations/
Flicker Emissions
IEC 61000-3-3
Not applicable
