Image Optimization 5-65
5.11.8.5 Image Saving and Reviewing in Smart 3D
Image saving
In 3D viewing mode, press the single image Save key (Save Image to hard drive) to save the
current image to the patient information management system in the set format and image size.
Save clip: in 3D viewing mode, press the user-defined Save key (Save Clip (Retrospective) to
hard drive) to save a CIN-format clip to the hard drive.
Image review
Open an image file to enter the image review mode. In this mode, you can perform the same
operations as in VR viewing mode.
5.11.8.6 Color Smart 3D
The system also supports the color Smart 3D flow image function.
5.11.9 3D Layout
The function compiles the 3 MPRs together according to their relative positions, to provide a much
clearer interior anatomical structure.
This function is provided by the [Niche] option, and does not support Smart 3D image data.
Niche
1. Select the [Tool]
[3D Layout] tab on the touch screen, then tap [Niche].
2. Tap [A]/[B]/[C]/[Niche] on the touch screen to select the reference plane as Plane A, Plane B, Plane
C or Niche.
3. Set the view direction for niche display mode using the touch screen: from the front of the reference
image or from the back.
4. Roll the trackball to view sectional images as necessary. Rotate <M>, <PW>, <C> to perform axial
rotation or rotate the <4D> knob to adjust the nearest VOI section (cut plane) position.
Click [Reset Ori.] to reset the rotation, the center point position, and the position of the MPR.
3Slice
1. Select [Tool]
[3D Layout] tab on the touch screen, then tap [3Slice].
2. Tap [A]/[B]/[C]/[3Slice] on the touch screen to select the reference plane.
3. Roll the trackball to view sectional images as necessary. Rotate <M>, <PW>, <C> to perform axial
rotation or rotate the <4D> knob to adjust the nearest VOI section (cut plane) position.
Click [Reset Ori.] to reset the rotation, the center point position, and the position of the MPR.
