12-6 Setup
Type
Item
Description
Max interval time
Set the maximum interval time. Enter Color mode and enable
ART Flow; the ART Flow is enabled again until the interval is
finished.
Parameter
Steer
To set the steer mode in B + Color + PW imaging mode.
C&PW: select to adjust the sample volume in color mode and
sample line in PW mode together.
C/PW: select to adjust the sample volume in color mode and
sample line in PW mode separately.
Auto Invert
The spectrum can automatically invert when the color flow is
steered to a certain angle, thus accommodating the
operator’s wish to distinguish the flow direction.
iScape Ruler Display
To set whether to display the iScape ruler in iScape imaging
mode.
B+Color Refresh with
PW/CW Sampling
Line Movement
To set whether to turn on the function that when moving
PW/CW sampling line, B+Color image is activated under
B+Color+PW/CW mode.
2D/M/Doppler Image
Refresh Display With
Preprocessing
Change
Adjust preprocessing parameter, refresh 2D/M/Doppler cine.
Fusion imaging Power frequency
Select the power frequency.
Tissue
Tracking
QA
Segment model
Set the cardiac segment model: 16 or 17.
12.1.4 Application
Open the page via [Setup]
[System]
[Application]. On this page, you can set the measurement ruler and
relevant inf
ormation. For details, see the Operator’s Manual [Advanced Volume]
12.1.5 OB Preset
Open the page via “[Setup]
[System]
[OB].” On this page, you can set the gestational age formula,
fetal growth formula, fetal weight formula and relevant information. For details,
see the Operator’s
Manual [Advanced Volume].
12.1.6 Key Configuration
Open the page via “[Setup]
[System]
[Key Config.].”
