LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 287

Page: 287 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

3.1.5

Flexible Station Numbering Plan (PGM 105)

PGM 105 assigns station intercom numbers to each station port. Two methods are available, Individual Station assignment or Station Range

assignment. When changing to a two (2) digit Station Numbering Plan, delete the existing numbering (press the [Speed] button) then enter the new

two (2) digit numbering. Also, assure that the new Station Numbering Plan does not conflict with other Numbering Plan codes.

Individual Station assignment Procedure:

1. Press

the

[TRANS/PGM]

button.

2. Dial

105.

3. The system displays the first 4 station ports on the first line of the LCD and the station number below the port

4. Use the Volume buttons to display the station port to be assigned.

5. Select the desired Flexible button, 1 ~ 4, for the port to be assigned.

6. Enter the appropriate value.

7. Press

the

[Hold/Save]

button.

Station Range assignment Procedure:

1. Press

the

[TRANS/PGM]

button.

2. Dial

105.

3. The system displays the first 4 station ports on the first line of the LCD and the station number below the port.

4. Use the Volume buttons to display the first station port to be assigned.

5. Enter the new station range (2 to 4 digits) for the start and ending station numbers. The range may extend past the displayed ports and

the system will assign the range to the ports consecutively until the entered range is exhausted.

6. Press

the

[Hold/Save]

button.

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Related manuals for ipldk-60

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Related manuals for ipldk-60

Brands by name

Popular brands