manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 38

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

30 

 

3.3 

Basic Outbound Line Access 

Description 

Each station is allowed or denied access to particular CO lines or lines in a CO Group.  
Stations may further be limited access by Intercom Tenancy Group (refer to Ref. A) 
configurations.    Flexible buttons assigned as a CO line or CO Group button, including the Pool 
and Loop buttons, provide the DKT user with access to Lines.  These buttons function as 
below. 
 

CO Line – access the specified CO Line 

 

Pool –access outgoing CO Line from the specified group 

 

Loop – access 1

st

 available CO Line 

 
The System Numbering Plan incorporates codes to access any available CO line, a specific CO 
line, or a line from a specific CO Group.    As a default, 
 

Dial ‘9’ for any available CO Line 

 

Dial ‘88’ and the CO line number (01 - 36) for a specific CO line 

 

Dial ‘8’ and the CO Group number (01 – 24) for a CO line from the group 

 

Operation 

To access a CO line from a DKT, 

1.  Lift the handset or press the [MON] button. 
2.  Press the desired CO line, Pool button, or Loop button or 

dial the individual CO line, CO Group or the first available CO line code. 

 
To access a CO line from a SLT, 

1.  Lift the handset. 
2.  Dial the individual CO line, CO Group or the 1st available CO line code. 

 
To assign the [LOOP] button, perform the following Steps: 

1.  Press the [TRANS/PGM] button 
2.  Press the desired Flexible button 
3. Press 

[TRANS/PGM] 

4.  Dial 8 4 
5.  Press the [HOLD/SAVE] button to accept changes. 

 

Consideration 

  An SLT user must use the dial codes to place CO line calls. 

  A DKT must have an available appearance for incoming or outgoing CO line calls and 

may use a button or dial codes to place CO line calls. 

  When the user dials ‘9’ for any CO line and ‘Override 1st CO Line Group’ is enabled, the 

system will search the first CO line Group for an available line.    If no Line is available in 
the group, the next group is searched until an available CO line is found or all groups, 
except group 00, have been searched.    If no CO line is available, busy tone is provided 
and the user may queue for the next available Line. 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands