LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 465

Page: 465 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

190

3.12.2 GateKeeper Settings (PGM 341)

PGM 341 configures the system to match the H.323 GateKeeper characteristics.

Procedure:

1. Press

the

[TRANS PGM]

button.

2. Dial

341.

3. Select the desired Flexible button.

4. Enter the appropriate value.

5. Press

the

[Hold/Save]

button.

PGM

341

Flex

Btn

Description

Default

Values

GK Usage

When enabled (On), the ipLDK will employ the GateKeeper to route all H.323 VoIP

outgoing calls.

0 (Off)

0 = Off

1 = On

GK Call Mode

This parameter determines the GateKeeper Call routing mode.

0 (Direct)

0 =Direct

1 = GK Reroute

GK Open H245

This parameter determines if the system will open an H.245 channel for H.323 VoIP

calls.

0 (Off)

0 = Off

1 = On

GK H245

Tunneling

This parameter determines if the GateKeeper will employ tunneling for H.245

messages.

0 (Off)

0 = Off

1 = On

GK Pre-granted

ARQ

When enabled (On), the GateKeeper has pre-granted admission to the GateKeeper

by the system.

0 (Off)

0 = Off

1 = On

GK Out of Band

Flash

6 Not

used

GK Time to Live

This parameter sets the duration between RRQ (Registrar Request) messages from

the VOIB to the GateKeeper as a keep-alive message.

030 seconds

000 ~ 250 in 1

second increments

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Related manuals for ipldk-60

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Related manuals for ipldk-60

Brands by name

Popular brands