LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 293

Page: 293 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

3.1.8

System IP Setup (PGM 108)

PGM 108 configures the IP address parameters for the system LAN port.

Procedure:

1. Press

the

[TRANS/PGM]

button.

2. Dial

108.

3. Select the desired Flexible button from the chart below.

4. Enter the appropriate value.

5. Press

the

[Hold/Save]

button.

PGM

108

Flex

Btn

Description

Default

Values

IP Name

This parameter assigns a Name, up to 15 characters, associated with the system’s

LAN port.

Not assigned

15 characters

ipLDK Server IP

address

This parameter defines the IP address for the system’s LAN port. This address is

assigned to allow LAN access to the system database and maintenance functions.

192.168.1.1 IPv4

address

CLI IP address

not used

Gateway Address

This parameter defines the IP address of the gateway serving the system LAN port.

0.0.0.0

IPv4 address

Subnet Mask

This parameter defines the Subnet mask for the system LAN interface. 255.255.255.0

IPv4

Subnet

mask

Point-to Point

Protocol

This parameter enables use of Point to Point protocol with the optional Modem unit

or an ISDN PRI Line.

0 (Off)

0 = Off

1 = On

Dial Pad Character Map

– 10

‘

’ – 13

– 20

A – 21

– 30

D – 31

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands