LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 366

Page: 366 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

3.5.7

CO-To-CO COS (PGM 166)

PGM 166 assigns the Day and Night/Weekend service mode COS for a CO-to-CO connection (Unsupervised Conference).

Procedure:

1. Press

the

[TRANS PGM]

button.

2. Dial

166.

3. Select the desired Flexible button.

4. Enter the appropriate value.

5. Press

the

[Hold/Save]

button.

PGM

166

Flex

Btn

Description

Default

Values

CO to CO Day

COS

This parameter defines the CO-to-CO Day mode COS. Refer to the table below for

COS values.

01 ~ 11

CO to CO Night

COS

This parameter defines the CO-to-CO Night and Weekend COS. Refer to the table

below for COS values.

01 ~ 11

CO to CO COS Table

Station COS

Restrictions

No restrictions are placed on dialing.

The assignments in the Exception Table A are monitored for Allow and Deny numbers.

The assignments in the Exception Table B are monitored for Allow and Deny numbers.

The assignments in both Exception Tables A & B are monitored for Allow and Deny numbers.

The leading digit dialed cannot be a long distance code. The dialed digits can be longer than

7 digits. There is no restriction for the number in Canned Toll Table.

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands