LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 102

Page: 102 / 512

Issue 2.2

Feature Description and Operation Manual



The Hot Desk station can be programmed to log-out an active Agent automatically if no

action has been taken by the Agent for the Auto Log-out timer.



The Flexible buttons of the Hot Desk station follow the assignments for the logged in

agent.



Only DKTs with more than 12 buttons can be used as Hot Desk stations.



The modem associated with the station cannot log in (PGM 170).



If the system is reset, all active Agents are logged out and all Hot Desk stations return to

the inactive state.



If the Hot Desk Agent station number is an ACD group member, logging in to a Hot Desk

also logs the Agent in the ACD group.

Reference

A.  Station User Programming
B. Station Groups
C.  Do Not Disturb (DND)
D. VMIB Voice Mail
E.  External Voice Mail

Admin Programming

Station Id (PGM 110, Flexible button 1)

Assigns the type of station

Dummy Station (PGM 112, Flexible button 23)

Assigns Hot Desk stations

Number of Agents (PGM 250, Flexible button 1)

Assigns the number of Agents that can use the Hot Desk

Assigned Station Number of Agents (PGM 250, Flexible button 2)

Displays the station numbers associated with Agents

Agent Auto Logout Timer (PGM 250, Flexible button 3)

Sets the Agent no-action log-out time

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands