LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 343

Page: 343 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

3.3.4

ISDN/IP CO Line Attributes (PGM 143)

PGM 143 assigns attributes associated with ISDN or VoIP to the CO line range.

Procedure:

1. Press

the

[TRANS/PGM]

button.

2. Dial

143.

3. Enter the appropriate CO line Range.

4. Select the desired Flexible button. For Numbering Plan Id, Flexible button 8, select Flexible button 1 for Calling or Flexible button 2 for

Called numbers.

5. Enter the appropriate value.

6. Press

the

[Hold/Save]

button.

PGM

143

Flex

Btn

Description

Default

Values

COLP Table

Index

This parameter defines the index to the COLP Table (PGM 201) used to determine

the COLP sent by the system. If the index is 50, the COLP is determined from PGM

114, Flexible button 5.

Not assigned

00 – 50

Delete softkey = Not

assigned

CLIP Table Index

This parameter defines the index to the COLP Table (PGM 201) used to determine

the CLIP sent by the system. If the index is 50, the CLIP is determined from PGM

114, Flexible button 5.

Not assigned

00 – 50

Delete softkey = Not

assigned

Call Type

This parameter defines the call type for the ISDN CO line CLI.

2 (National)

0 = Unknown

1 = International

2 = National

3 = Not used

4 = Subscriber

DID Conversion

This parameter defines the DID digit conversion process for DID digits received from

0 (Use Digit Mask 0 = Digit Mask

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands