manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 56

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

48 

 

3.12.6 

Station Speed Dial 

Description 

Each Station user can store up to 100 frequently used numbers to Station Speed Bins (000 – 
099).    Each Station Speed Dial consists of up to 24 digits including special function digits. 
 

Operation 

To make a call using Station Speed Dial from a DKT, 

1.  Lift the handset or press the [On/Off] button. 
2.  Press the [SPEED] button. 
3.  Dial the Station Speed Dial bin (000 – 099). 

 
To store Station Speed Dial numbers from a DKT, 

1.  Press the [TRANS/PGM] button. 
2.  Press the [SPEED] button. 
3.  Dial the Station Speed Dial bin (000 – 099). 
4.  If desired, press the CO line or Group button. 
5.  Dial the desired telephone number, up to 24 digits including special codes: 

 

Special codes include: 

 

[CALL BACK]

 – Insert Pause key 

 

 

 – If stored as the first digit, it will function as Display Security.    Otherwise, it will 

function as a Pulse to DTMF Switchover. 

 

[DND/FOR] 

– If CO Dial Tone Detect is enabled and stored as the first or second 

digit, and the accessed CO Line is behind the PBX mode, its function is Dial Tone 
Detect.    Otherwise, its function is Pause. 

 

[FLASH]

 – 

If the CO Line is analog, a ‘Flash’ is inserted in the Speed Dial number. 
For an ISDN line (refer to Ref. A), when stored as the first digit, the remaining digits 
are sent in a keypad facility IE (Information Element) not in the normal Calling Party 
Number IE. 

6.  Press the [HOLD/SAVE] button.   
7.  If desired, enter the name (Max. 16 characters) using the 2-digit code for each 

character. 

8.  Press the [HOLD/SAVE] button. 
9.  To store another Speed Dial number, repeat this procedure from Step 3. 

 
To delete a Station Speed Dial bin, 

1.  Press the [TRANS/PGM] button. 
2.  Press the [SPEED] button. 
3.  Dial the Speed Dial bin number to be erased. 
4.  Press the [HOLD/SAVE] button. 
5.  The stored Speed Dial number should be erased from the speed bin. 

 
To display and enter a Speed Dial bin by scrolling,   

1.  Press the [TRANS/PGM] button. 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands