LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 306

Page: 306 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

PGM

113

Flex

Btn

Description

Default

Values

parties. Caller Voice Over must be enabled for the calling station, PGM 111 button

22.

1 = Enable

Warm Line

This parameter configures Idle Line Selection for the station for Hot Line (immediate

connection) or Warm Line (delayed for the Warm Line Time PGM 182, Flexible

button 8). See also PGM 122 for Idle Line Selection.

0 (Warm)

0 = Warm

1 = Hot

VMIB MSG

Password

If this parameter is set to ‘On’, the station user must enter their password to access

the VMIB Voice Mailbox.

0 (Off)

0 = Off

1 = On

VMIB MSG

Date/Time

If this parameter is set to ‘On’, the VMIB will play the Date and Time stamp for each

message before playing the message.

1 (On)

0 = Off

1 = On

Alarm Attribute

If this parameter is set to ‘On’, the station receives alarm signals. See PGM 163 for

Alarm contact programming.

0 (Off)

0 = Off

1 = On

Mute Ring

If this parameter is set to ‘On’, the station, while busy, receives mute ring for an

incoming call.

1 (On)

0 = Off

1 = On

Call Cut Off timer

This parameter defines the duration of an outgoing call when the station is assigned

CO Call Time Restriction (PGM 112, Flexible button 3). Time is set in minutes and a

value of ‘0’ disables the restriction.

0 minutes

00~99 minutes

Barge In Mode

This parameter configures Barge-in capabilities for the station. Barge-in may be

disabled, set for a one-way connection (Monitor) or a two-way connection (Speech).

In the Monitor mode, the user may release the mute condition to be heard.

0 (Disable)

0 - Disable

1 - Monitor

2 - Speech

Auto Forward to

VMIB

When enabled (On), calls to the station forward to the station VMIB Mailbox when

the FWD to VMIB timer (PGM 181, Flexible button 20) expires.

1 (On)

0 = Off

1 = On

Station Port

Block

If this parameter is set to ‘On’, the station port is disabled and any connected station

is out-of-service.

0 (Off)

0 = Off

1 = On

Preset-MSG

DND

If enabled (On), activating Absent Text Messages at the station also places the

station in DND.

1 (On)

0 = Off

1 = On

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands