LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 477

Page: 477 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

202

3.13.4 IP Phone Attributes (PGM 386)

PGM 386 defines the MAC address of IP Phones allowed to register and displays attributes of registered IP Phones.

Procedure:

1. Press

the

[TRANS PGM]

button.

2. Dial

386.

3. Enter the Table index (01 – 16).

4. Select the desired Flexible button.

5. Enter the appropriate value.

6. Press

the

[Hold/Save]

button.

PGM

386

Flex

Btn

Description

Default

Values

Set MAC

Address

This parameter defines the MAC address of each IP Phone, up to 16, the ipLDK-60

should register to the system.

00-00-00-00-00-

12-hex digits (0 ~ F)

IP Address

Display

This Flexible button displays the IP Address of the IP phone.

Display only

Port View

This Flexible button displays the Station Number of IP phone.

Display only

Port Number

View

This Flexible button displays the Port Number of IP phone.

Display only

NAT IP Address

Display

This Flexible button displays the NAT IP Address of IP phone.

Display only

NAT Port

Number

This Flexible button displays the NAT Port Numbers being used.

Display only

STUN Enabled

This Flexible button displays the IP Phone NAT-PAT status as NAT, PAT, NAT and

PAT or None.

Display

only

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands