manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 93

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

85 

 

5  D

IGITAL 

K

EY 

T

ELEPHONE 

F

EATURES

 

 

5.1 

Do-Not-Disturb (DND) 

Description 

While in DND, the station will not receive ringing for CO line calls or Page announcements and 
stations calling or transferring calls to a station in DND will receive fast busy tone.    CO Line 
calls to a station in DND are sent to the Attendant or, if enabled, calls forward to the station’s 
Voice Mailbox.    While in DND, the station user can place calls in the normal fashion. 
 
The station must be permitted use of DND to activate DND.  The Attendant can override a 
station in DND (refer to Ref. A).    By default, DND is available at all stations. 
 

Operation 

To toggle DND from a DKT, 

1.  Press the [DND/FOR] button. 

 
To toggle DND from an SLT, 

1.  Lift the handset 
2.  Dial 5 5 3. 

 

Consideration 

  Pressing the [DND/FOR] button with Call Forward or Absent Text Message active will 

deactivate the forward or message and will not activate DND 

  When a station is assigned as part of a Preset Call Forward chain and is in DND mode, 

the call is sent to the next station in the Call Forward chain. 

  The user must record a greeting for calls to Forward to the Voice Mail, otherwise the call 

is sent to the DND announcement. 

  Executive/Secretary assignments (refer to Ref H) will override DND forward to Voice Mail. 

  The Attendant may cancel DND state at other Stations. 

  DND is available to SLTs as well as DKT and IP Phone stations.    For the SLT, DND is 

activated/deactivated by dialing the DND code ‘5 5 3. 

 

Reference 

A.  Attendant Intrusion, Override 
B. Ring Assignment 
C.  Preset Call Forward 
D. Call Forward 
E.  Absent Text Message 
F. Camp-on 
G. One-Time DND 
H. Executive/Secretary  

 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands