LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 329

Page: 329 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

3.2.18 Virtual Mailbox Attributes (PGM 129)

PGM 129 defines Attributes for Virtual mailboxes including notification, Mail access privileges, and Company Directory names associated with the

mailbox.

Procedure:

1. Press

the

[TRANS/PGM]

button.

2. Dial

129.

3. Enter the Virtual Mailbox number (200 – 249)

4. Selected desired Flexible button from the chart below

5. Enter the desired value.

6. Press

the

[Hold/Save]

button.

PGM

129

Flex

Btn

Description

Default

Values

Administrative

Mailbox

A mailbox can be assigned to allow access to other mailboxes and other

administrative functions.

0 (Disable)

0 = Disable

1 = Enable

VMIB access

The VMIB Access parameter enables the Virtual Voice Mailbox to receive calls.

0 (Disable)

0 = Disable

1 = Enable

Class of Service

Each mailbox can be assigned a COS to define specific characteristics of the

mailbox including message storage limitations and message delivery options, refer to

PGM 238.

1 ~ 5

Announce Only

A mailbox can be configured to provide an announcement only and will not provide

incoming message storage.

0 (Disable)

0 = Disable

1 = Enable

Action after

Announcement

When configured as an “Announcement Only” mailbox, the system will either

disconnect the call or return the caller to the previous announcement

0 (hang-up)

0 = Hang-up

1 = Previous

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands