manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 134

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

126 

 

8.3 

Push-to-Talk (PTT) Page 

Description 

The LG-Ericsson WIT-300HE wireless LAN phone incorporates a Push-to-Talk (PTT) page 
facility.    The button can be assigned to access an internal Page zone to send a PTT page to 
stations in the page zone. 
 

Operation 

To assign an internal page zone to the PTT at the WIT-300HE, 

1.  Press the [TRANS/PGM] button. 
2. Press 

‘1#’. 

3.  Dial the desired Page Zone, or ‘0’ to delete the current assignment. 
4.  Press the [HOLD/SAVE] button. 

 
To send a PTT Page at the WIT-300HE, 

1.  Press the PTT button. 
2.  After the Page warning tone, audio from the WIT-300 is sent to the Internal Zone. 
3.  Release the button to terminate the PTT Page. 

 

Consideration 

  Page Time-out is not applied to a Push-to-talk Page. 

  Any Internal Page Zone can be assigned for Push-to-talk.  Conference Page Zones 

cannot be assigned for Push-to-talk. 

  To access PTT paging, the station must be permitted access to system paging 

  A station, which is in DND or busy, will not receive paging announcements. 

 

Reference 

A.  Internal, External and All-Call Paging 
B. Paging Conference 

 

Admin Programming 

Page Access (PGM 111, Flexible button 8) 
 

Enables stations access to paging features of the ipLDK 

Internal Page Zone (PGM 118) 
 

Assigns stations to Internal Page zones 

Page Warning Tone (PGM 161, Flexible button 4) 
 

Enables a beep tone prior to page audio 

 
 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands