manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 141

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

133 

 

9.2 

Linked-Pair Station 

Description 

A station can be logically linked to a primary station so that the two stations function as a single 
station.  When linked, the two stations effectively act as a single station with the station 
attributes of the primary station.    The status of one station is reflected in the status of the other 
and features activated at one are active at the other.    All internal or external calls to a linked 
pair station will ring both stations. 
 
All features available to the primary station are available and controllable by the secondary 
station, one station may activate Call Forward and the other may cancel the forward.  The 
displays of the linked stations will display the status of the linked pair.  If one of the linked 
stations is busy, the LCD of the other station will display “IN USE AT LINK STA”.  When a 
linked station is busy, the other idle linked station will not receive ring for CO lines, transferred 
ring or intercom calls. 
 

Consideration 

  A station can be linked with only one station.    Any combination of DKTs and SLTs may 

be assigned as Linked pairs. 

  A DSS Console, Door Phone Box or Port Blocked Station may not be assigned as a 

linked pair station. 

  Linked pair stations are treated as having a single station number for all features including 

LCD displays, station programming, ADMIN access, ACD statistics, SMDR, etc. 

  Intercom calls to the Linked stations always signal in the Tone ring mode and cannot be 

changed using the Forced Hands-free feature. 

  The station attributes of the secondary station will follow attributes of the primary station, 

i.e. Day/Night COS, CO Warning Tone, CO Auto Hold, CO Call Drop, DID Call Waiting, 
Speed Access, Alarm, VMIB Access, DND, FWD, Paging, CO Access, CO Ring, etc. 

  An Attendant station can be linked with another station but, the linked station cannot use 

attendant features (refer to Ref. D). 

  Calls can be placed or transferred between the stations of a Linked pair using the primary 

station number. 

 

Reference 

A. Call Transfer 
B. DND 
C. Call Forward 
D. Attendant 
E.  Intercom Signaling Mode 
F.  Forced Hands-free Mode 

 

Admin Programming 

Linked Station Pairs (PGM 179) 
 

Assigns the Linked stations 

 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands