LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 350

Page: 350 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

3.3.8

CO Line Caller Id (CID) Attributes (PGM 147)

PGM 147 defines the Caller Id characteristics associated with analog CO lines.

Procedure:

1. Press

the

[TRANS/PGM]

button.

2. Dial

147.

3. Enter the appropriate CO Line Range.

4. Press the desired Flexible button.

5. Enter the appropriate value.

6. Press

the

[Hold/Save]

button.

PGM

147

Flex

Btn

Description

Default

Values

CID Mode Select

This parameter defines the type of Caller Id signal provided by the PSTN.

1 (FSK)

0 = Disable

1 = FSK

2 = DTMF

3 = Russia CID

4 = Russia Auto CID

CID Name

Display

When the analog CO line provides the caller’s name as well as number, the system

can display the telephone number or the name and the telephone number received.

0 (Telephone

number)

0 = Tel. number.

1 = Name

RCID Detect

This parameter determines the types of call that include CID, only local calls, or all

calls. (Intended for use in Russia only)

0 (Local)

0 = Local

1 = All

RCID Request

This parameter determines if the system will request Caller ID from the network.

(Intended for use in Russia only)

1 (Auto)

0 = Auto

1 = User

RCID Request

Timer

When RCID Request (Flexible button 4) is set to auto, the system will delay sending

the request for the setting of this timer. (Intended for use in Russia only)

150 (1.5

seconds)

010 ~ 150 in 10 milli-

second increments

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands