manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 106

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

98 

 

5.9 

Station Relocation 

Description 

A station can be moved from one location (station port) to another without loss of any 
configuration information using Station Relocation.  The user activates Station Relocation, 
which stores the configuration in a temporary buffer.  The phone is then moved to the new 
location and the configuration information copied to the new station port. 
 

Operation 

To store the station configuration to the Station Relocation buffer,   

1.  Press the [TRANS/PGM] button 
2.  Dial ‘* 1’, the Station Relocation Backup code. 
3.  Unplug the station. 

 
To retrieve stored station attributes, 

1.  Plug the phone in at the new location. 
2.  Press the [TRANS/PGM] button 
3.  Dial ‘* 2’ the Station Relocation Retrieve code. 
4.  The Station Attributes are copied to the current station location. 

 

Consideration 

  All information for the port of the destination station will be retained so that it may be 

copied or relocated to another port. 

  If a different station type (12-button versus 24-button) retrieves the Relocation buffer, 

Flexible button assignments may not be correct and may require reconfiguration. 

  DKTs must be relocated to another hybrid or digital port; a DKT cannot be relocated to an 

SLT port. 

 

Reference 

A.  Station User Programming 

 
 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands