LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 444

Page: 444 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

169

3.9.10 Weekly Time Table (PGM 233)

PGM 233 configures separate Weekly Time Tables to control Auto Ring mode for the system and each Intercom Tenancy Group.

Procedure:

1. Press

the

[TRANS PGM]

button.

2. Dial

233.

3. Dial ‘0 ~ 5’; ‘0’ is for the system and ‘1 ~ 5’ are for the individual Intercom Tenancy Groups.

4. Select Flexible button ‘1 – 7’ for Monday to Sunday, respectively.

5. Select the Flexible button for the desired time entry.

6. Enter the desired Time as four (4) digits.

7. Press

the

[Hold/Save]

button.

PGM

233

Flex

Btn

Description

Default

Values

Day

This parameter defines the start time for Day mode service when Auto Ring service

is active.

Mon – Fri

09:00

4 digits, 0000 ~ 23:59

Night

This parameter defines the start time for Night mode service when Auto Ring service

is active.

Mon – Thu

18:00

4 digits, 0000 ~ 23:59

Weekend

This parameter defines the start time for Weekend mode service when Auto Ring

service is active.

Fri

18:00

4 digits, 0000 ~ 23:59

Lunch Start

This parameter defines the start time for Lunch mode service when Auto Ring

service is active.

Not assigned

4 digits, 0000 ~ 23:59

Lunch End

This parameter defines the end time for Lunch mode service when Auto Ring service

is active.

Not assigned

4 digits, 0000 ~ 23:59

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands