LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 361

Page: 361 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

PGM

161

Flex

Btn

Description

Default

Values

buttons 13 and 14.

No DSS

Indication

When enable (On), the CO line and DSS/BLF buttons at a Station do not provide

incoming call indications for the calls to other Stations.

0 (Disable)

0 = Disable

1 = Enable

UK Billing Mode

UK Only

If this parameter is ‘On’, the UK Billing Mode is applied. (UK Only)

0 (Off)

0 = Off

1 = On

COS 7 When

Authorization Fail

When enabled (On), if an invalid Authorization Code is entered, the system changes

the Station COS to 7 – fully restricted. Also, if the station has no Day and Night COS

assignment (PGM 116) the Day and Night are changed to 7 and must be reassigned

to recover. Otherwise, the user may return to the normal COS with the COS Restore

procedure.

0 (Off)

0 = Off

1 = On

5-digit

Authorization

Code

This parameter determines the structure of Authorization Codes; when ‘On’ fixed 5-

digit Authorization Codes are used, when Off variable 3 to 11-digit codes are used

and ‘#’ is the terminating digit.

0 (Off)

0 = Off

1 = On

LCR Dial Tone

Detect

When enabled (On), for all LCR Modes except M13, the system will verify dial tone

on an analog CO line; if dial tone is not received, the Alternate DMT Index is used to

route the call.

0 (Off)

0 = Off

1 = On

Transit-Out

Security

When enabled (On), the system will verify the IP address in the Transit-Out set-up

message received by the VOIB is from a registered IP address. If not registered, the

Transit-Out call will fail.

0 (Off)

0 = Off

1 = On

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands