manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 2

 

 

Issue 2.2 

Feature Description and Operation Manual 

 

Copyright© 2010 LG-Ericsson Co., Ltd.All Rights Reserved 

This material is copyrighted by LG-

 Ericsson

 Co. Ltd.. Any unauthorized reproductions, use or disclosure of this material, or any 

part thereof, is strictly prohibited and is a violation of Copyright Laws. 

LG-Ericsson

 reserves the right to make changes in 

specifications at any time without notice. The information furnished by 

LG-Ericsson

 in this material is believed to be accurate and 

reliable, but is not warranted to be true in all cases.    All other brand and product names are trademarks or registered trademarks of 
their respective companies. 

 

Revision History 

 

Issue 

Date 

Contents of Changes 

1.0 

2006.10 

Preliminary Release for ipLDK-60 

2.0 

2007.12 

Second Release for ipLDK-60 

2.1  

Reformatting through-out 
General update

 

2.2 

 

Update for ipLDK-60 Version 2 

 

 

 

 
 
 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands