LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 322

Page: 322 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

3.2.13 Idle Line Selection (PGM 122)

PGM 122 defines the Idle Line Selection for the station. The defined Idle Line Selection is accessed when the station goes Off-hook. Idle Line

Selection can be immediate (Hot Line) or delayed (Warm Line). Hot/Warm Line operation is defined in PGM 113, Flexible button 7. The Warm Line

delay is defined in PGM 182, Flexible button 8.

Procedure:

1. Press

the

[TRANS/PGM]

button.

2. Dial

122.

3. Enter the appropriate Station Range.

4. Enter the desired Idle Line Selection Type and Value.

5. Press

the

[Hold/Save]

button.

PGM

122

Flex

Btn

Description

Default

Values

Idle Line

Selection

This parameter defines the CO line, station, or Flexible button the system connects

to the station when the station goes off-hook. Use the Delete softkey to remove an

assignment and provide Internal dial tone.

No assignment

Internal dial tone

Type: 1 ~ 4 &

Value = Range from

Idle Line Select Table

Idle Line Select Table

Type

Item

Range

Description

Flexible button

01 - 44

Activate a feature of a Flexible button as if pressed.

CO Line

01 - 36

Access a CO Line.

CO Line Group

01 - 24

Access a CO line from a CO Group.

Station

100 - 147

Call a station.

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands