LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 468

Page: 468 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

193

3.12.3 SIP Attributes I (PGM 500, PC Admin only)

PGM 500 is one of two PGMs used to configure SIP operation, see also PGM 501.

Procedure:

1. PC Admin only.

PGM

500

Flex

Btn

Description

Default

Values

Proxy Server

Address

This parameter defines the IP address or URI for the SIP proxy server.

Not assigned

Max 32 digits

character string (e.g.

abcd@efg), see Dial

Pad Character chart

Proxy Server Port

This parameter defines the port used for SIP messages to/from the SIP Proxy

server.

5060 0000

9999

Proxy

Registration

Timer

This parameter defines the valid registration interval the system will request when

registering with a SIP Call server.

3600 seconds

0 ~ 65535 (sec)

Use Outbound

Proxy

When enabled (On), the system sends SIP signaling messages to the SIP Proxy

otherwise messages are sent to the Call server.

On Off

Primary DNS

Address

This parameter defines the primary Domain Name Server the ipLDK will use to

convert a URI to an IP address.

Not assigned

IPv4 address

Secondary DNS

Address

This parameter defines the secondary Domain Name Server the ipLDK will use to

convert a URI to an IP address if the primary DNS does not respond.

Not assigned

IPv4 address

Domain

This parameter defines the domain (name or IP address) used by the system in To:

and From: SIP messages when a separate SIP User id is not defined. See also

PGM 111 Flexible button 23 and PGM 501.

Not assigned

Value : Max 32 digits

character string (e.g.

domain.name.com)

Connection Mode

This parameter defines the transport mode for SIP signaling messages, Transport

UDP

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands