manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 35

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

27 

 

3  O

UTGOING 

C

ALL 

S

ERVICES

 

 

3.1 

Authorization Code 

Description 

Authorization Codes (passwords) provide a means to control access to Walking COS, or DISA 
and may be required for outgoing CO line, LCR, and Voice Mail In-box access.  An 
Authorization Code can be either a fixed length of five (5) digits or a variable length of 3 to 11 
digits. 
 
There are two types of Authorization Codes, Station and System.  A Station Authorization 
Code is specifically related to a given station and intended for a single user.  The System 
Authorization Codes are intended for use by any station in the system.    Authorization Codes 
are assigned a Day and Night COS.  When users dial an Authorization Code, the system 
invokes the COS assigned to Authorization Code or, if no COS is assigned, the Station COS is 
invoked. 
 
The Attendant is permitted to assign any Authorization Code including codes for another station.   
Normal users may only assign the Station Authorization Codes (password) for the specific 
station. 
 

Operation 

To access a CO line when an Authorization Code is required, 

1.  When attempting CO line access, a DND warning tone or announcement is heard. 
2.  Dial the Authorization Code, and ‘#’.    If 5-digit codes are assigned, ‘#’ is not needed. 
3.  If valid, the CO line connects; if not valid, error tone is presented. 

 
To register an Authorization Code when none has been assigned, 

1.  Press the [TRANS/PGM] button. 
2.  Dial 3 1. 
3.  Dial the Authorization Code, and ‘#’.    If 5-digit codes are assigned, ‘#’ is not needed. 
4.  Press the [HOLD/SAVE] button to accept changes. 

 
To change an existing Authorization Code, 

1.  Press the [TRANS/PGM] button. 
2.  Dial 3 2. 
3.  Dial the existing Authorization Code, and ‘#’.    If 5-digit codes are assigned, ‘#’ is not 

needed. 

4.  Dial the new Authorization Code. 
5.  Press [HOLD/SAVE] to accept changes. 

 
 
 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands