manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 143

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

135 

2.  Dial ‘3 6’. 
3.  Dial ‘1’ to activate, or ‘0’ to deactivate 
4.  Press the [HOLD/SAVE] button. 

 
To enable Voice Message Notification to the mobile, 

1.  Press the [TRANS/PGM] 
2.  Dial ‘3 7’. 
3.  Dial ‘1’ to activate, or ‘0’ to deactivate 
4.  Press the [HOLD/SAVE] button. 

 
To Transfer from the mobile back to an ipLDK station, 

1.  Press the ‘*’. 
2.  Dial the station number to receive the call. 
3.  Hang-up to complete the transfer 
Or, if busy, 
4.  Press ‘#’ to return to the caller. 

 
To place a call from the mobile using the ipLDK facilities, 

1.  Dial the user’s ipLDK DID number, the ipLDK will return dial tone. 
2.  Place call using dial codes. 

 

Consideration 

  If the extension is busy, forwarded, or in the DND state, calls will not route to the mobile 

extension. 

  When the mobile is busy on an ipLDK call, station calls to the associated station will 

receive busy.  In this case, a Message Wait can be left to the station, however Call 
Waiting is not available. 

  When making an external call from a mobile extension through the ipLDK system, the 

system sends the CLI associated with the station and the mobile extension cannot use 
the transfer feature 

  If the call is not answered in the DID/DISA No-answer time, the ipLDK will reroute the call 

based on the DID/DISA No Answer Destination or the call may be rerouted by the GSM 
network depending on which timer is shorter. 

  This feature applies only to ISDN DID and IP CO lines, and station-to-station calls 

including transfers. 

  Mobile extensions cannot activate or receive Station Message Wait/Callback features. 

  While on an active ipLDK call, the mobile extension is only permitted to transfer the call to 

another station.    If the mobile user attempts to seize a CO line or call a hunt group, error 
tone will be provided. 

  If the “Transfer recall” timer expires, the call is routed to the extension associated with 

mobile extension. 

  Outgoing calls from a mobile extension are restricted by the COS of the associated 

station. 

  When receiving a call from ipLDK, the mobile will receive either the original CLI or the CLI 

of the user’s station based on configuration of the ISDN line CLI Transit parameter 
(ORI/CFW). 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands