manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 316

ipLDK-60

 

 

 

Issue 2.0 

Admin Programming Manual 

July, 2010 

 

 

 

41 

3.2.8 

CO Line Group Access (PGM 117) 

PGM 117 defines the CO line Groups available to a station.  The station user may access CO lines from the CO Group using dial codes or a Flexible 

button assigned to the CO Group. 

 

Procedure: 

1. Press 

the 

[TRANS/PGM]

 button. 

2. Dial 

117. 

3.  Enter the appropriate Station Range. 

4.  Press the Flexible button to enable/disable CO Group access. 

5. Press 

the 

[Hold/Save]

 button. 

 

PGM 

117 

Flex 

Btn 

Description 

Default 

Values 

CO Line Group 

1 ~ 24 

CO lines are assigned to a CO Group (PGM 141, Flexible button1).  Each station is 

assigned access to the CO Group and thus the CO lines in the group.  The Flexible 

button toggles access to the CO Group and the LED indicates access, 

 

‘On’ = allowed access 

 

‘Off’ = access not allowed. 

All stations have 

access to all CO 

Groups 

Flexible button 1 ~ 24 

 

 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands