manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 227

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

219 

  Outgoing H.323 calls must use Enblock signaling; the ipLDK will wait for the user to dial 

‘#’ or the Enblock Timer setting before setting up an H.323 call. 

  MSN tables, COLP, CLIP, CLI Message Wait, etc. apply to VOIB CO lines. 

  VOIB CO lines can be used to support mobile extensions. 

  A H.323 line can be shared by multiple ipLDK-60 users as a common (‘Normal’) line. 

  The system can be equipped with eight (8) VoIP channels that are used to support IP 

Trunks, IP Phones and Phontage IP softphones and may be used to support Private 
Networking.  Assure sufficient channels are available to support the desired channels 
and expected traffic. 

  VOIB CO lines may not be compatible with E911 systems; the user is advised to arrange 

appropriate emergency services. 

  It may be necessary to configure stations for access to the assigned CO line group and 

Flexible buttons for one-touch access. 

 

Reference 

A. Private Networking 

 
Admin Programming 

Normal/Fast Mode (PGM 340, Flexible button 18) 
 

Assigns normal or Fast mode call set-up for H.323 

Early H.245 (PGM 340, Flexible button 19) 
 

Enables Early mode for H.245 channel set-up 

H.245 Tunneling (PGM 340, Flexible button 20) 
 

Enables tunneling for the h.245 channel 

Precedence value(PGM 340, Flexible button 21) 
 

Defines the H.323 TOS byte for precedence 

 
 

15.1.1 

Configuring H.323 GateKeeper Mode 

Description 

The following is a quick guide to configuration for operation with an H.323 GateKeeper, 

 

Set CO Service Type for ‘Normal’ or ‘DID’ service (PGM 140) 

 

Set the CO line group for the VOIB CO lines (PGM 141) 

 

Set ISDN line characteristics (PGM 143) 
including CLIP and COLP 

 

Set ISDN Call Type as desired (PGM 143) 

 

Set ISDN Enblock Send ‘On’, all IP calls are Enblock (PGM 143) 

 

Set DID CONV Type, Digit Mask, etc., if required, (PGM 143) 

 

Set Ring Assignments, if required (PGM 145) 

 

Set the Enblock Timer, if required (PGM 182) 

 

Configure DID Tables, if required, (PGM 167 and 231) 

 

Set Networking CO Line Type as H.323 (PGM 322). 

 

Configure VOIB IP settings, as required (PGM 340) 
IP addresses, VOIB, subnet mask, Gateway, DNS 
Set VOIB Mode to H.323 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands