manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 215

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

207 

CID Name/Number (PGM 147, Flexible button 2) 
 

Determines the displayed CID information (Name and/or Number) 

International Access Code (PGM 200, Flexible button 7) 
 

Assigns International Access Code for the system, maximum 4 digits 

My Area Code (PGM 200, Flexible button 9) 
 

Assigns the Area Code for the system, maximum 6 digits 

My Area Prefix Code (PGM 200, Flexible button 10) 
 

Assigns a prefix code for the system, maximum 4 digits 

Maintain DID Name (PGM 200, Flexible button 11) 
 

Enables maintain the DID name on the LCD 

 
 

14.3.2 

Outgoing Call ID Service 

Description 

When a station of ipLDK system places or answers an ISDN CO line the system will generate 
the CLI or COL, as appropriate, based on the Station ISDN Attributes, ISDN CO Line Attributes, 
the System ISDN Attributes and COLP/CLIP table.  The generated ID will be placed in the 
appropriate Call Set-up or Call Connect message back to the ISDN. 
 
Each ISDN CO line is assigned a CLI Type, Normal (discussed later) Long CLI1 or Long CLI2.   
For Long CLI1 and Long CLI2, the Long CLI1 or Long CLI2 assigned for the station make-up 
the body of the Call ID.    Based on the Call Type assigned to the line, the system will add the 
assigned International Dial Code and My Area Code to the front of the ID.  In addition, if 
assigned for Outgoing Prefix Code Insertion for the ISDN CO line, My Prefix Code will also be 
appended to the ID.    The prefix code is enabled separately for incoming (COLP) and outgoing 
(CLIP) calls. 
 
When the CLI Type for the line is ‘Normal’ and the COLP and CLIP Table Index for the ISDN 
CO line is unassigned (5 0), the system will determine the ID from the Station ISDN Attributes.   
The system will generate the CID using the extension (EXT) or CO line Attendant (ATD).  
When assigned for EXT, the station CLI Type is set for Short or Long CLI.    For Short CLI, the 
assigned ISDN CLI Station number (up to 4-digits) is used and for Long CLI the Long Sta CLI 
(up to 12 digits) is used.    The body of the ID is then determined as the EXT or ATD number.   
Based on the Call Type assigned to the line, the system will add the assigned International Dial 
Code and My Area Code to the front of the ID.  In addition, if assigned for Outgoing Prefix 
Code Insertion for the ISDN CO line, My Area Prefix Code will also be appended to the ID.  
The prefix code is enabled separately for incoming (COLP) and outgoing (CLIP) calls. 
 

Consideration 

  If Calling/Connected Line Identification Restriction (refer to REF A.) is enabled for the 

station and is supported by the ISDN, the system will send the restriction message in 
place of the CLI or COL. 

 

Reference 

A. CLIR/COLR 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands